McDonald Engineers has demonstrated why it’s the UK’s leading manufacturer of bespoke hot water cylinders, by designing and manufacturing a highly technical cylinder that no other manufacturer was prepared to take on.
After discussing the project at length with the client, McDonald Engineers team specified an ELECTRAflow vented thermal store featuring eight immersion heaters, a solid fuel capability and two domestic hot water draw off coils.
A supplier recently mentioned how he’d put a generic toner into his Canon branded fax machine and consequently broke it – unfortunately, that is the risk you take when you use non genuine parts and it can prove costly. The same applies when sourcing spare parts for McDonald Engineer Hot Water Cylinders. We strongly recommend using only genuine McDonald Engineers replacement parts for our hot water cylinders to ensure that your system continues to operate efficiently.
McDonald Engineers has once again reinforced its position as one of the UK’s leading manufacturers of copper hot water cylinders by increasing the specification of its standard Thermal Stores to deliver maximum performance. The move comes following extensive trials with its market leading THERMflow Thermal Store, over the last 12 months where the company measured the response from clients and the effect on performance. The THERMflow is now manufactured from a minimum of 1mm thick copper and features an extended length secondary coil for all units.
McDonald Engineers is ensuring that rig workers are kept squeaky clean by supplying 5 x 1000 Litre Calorifiers to two separate oil rigs in the North Sea. Designed to work at high incoming pressures, with a quick recovery provided by multiple Immersion Heaters, the Calorifiers will provide the water for the showering and kitchen facilities.
McDonald Engineers has secured a 3 year contract to supply 300 of their ELECTRAflow Electric Wet Central Heating Systems, as part of a social housing refit programme, which is due to commence late 2010.
Whilst home to some of the most experienced copper brazers in the country, McDonald Engineers recently undertook training from their brazing rod supplier. They provided an insight into the latest developments in brazing, as well as going over the advanced methods that the company employs on a daily basis.
This method of joining metals using heat and a filler has been practised by McDonald Engineers for many years, however in a bid to continually develop and keep the standards high, McDonalds proactively set aside the time to hone their skills.
McDonald Engineers are proud to have won a recent tender to supply a leading top hotel in Edinburgh. Based not only on the high quality of the Copper Hot Water Cylinders that they produce, but on their competitive pricing, lead times and quality service. The order for two 900 litre Calorifiers, was to be delivered on a site where space was highlighted as an issue. For this reason, McDonald Engineers offered to insulate the units on site to maximise the capacity.