THERMflow specifications
Back to THERMflow
For specification choose the type of UNIT then the appropriate MODEL.
Combination Unit - Use in new-build situations or where no remote
primary feed &
expansion tank exists. Primary Feed and Expansion Tank must be 500mm above
top of radiators.
OR
Cylinder Unit - Use when there is an existing remote primary feed
& expansion tank. Working head of system must be given when specifying/pricing.
AND
Boiler Model: Use when space heating and hot water are required.
Suitable for oil, gas and certain solid fuel boilers. Specify if boiler
is Vented or Sealed System.
OR
Electric Model: Use when no space heating is required. Supplied with
twin immersions to take advantage of low cost tariffs.
e.g. a location with no loft space and a gas boiler would need a Combination-type,
boiler model.
SIZING GUIDE:
Cylinder Reference |
Boiler Model | Electric Model |
THERMflow 120 |
1/2 bedroom. Bath or Shower Boiler sizing requirements: Allow 4kW for Hot Water |
1 bedroom. |
THERMflow 140 |
2/3 bedroom. Bath or Shower Boiler sizing requirements: Allow 5kW for Hot Water |
1/2 bedroom. |
THERMflow 180 |
3/4 bedroom. Bath or Shower Boiler sizing requirements: Allow 6kW for Hot Water |
1/2 bedroom |
THERMflow 210 |
4/5 bedroom. Bath or Shower Boiler sizing requirements: Allow 7kW for Hot Water |
2/3 bedroom |
Supplied as standard with all THERMflow units:
- servicable strainer
- non-return valve
- expansion chamber
- thermostatic mixing valve
- connecting pipework
- Isolating valve*
- Ballvalve, float & overflow*
- 2 immersion heaters fitted - (electric models only)
- probe-type cylinder thermostat - (boiler models only)
- Double thickness CFC free insulation.
Options:
- Immersion Heater supplied with Boiler Model.
- Double Pump Kit (not fitted): two Grundfos 15-50 circulating pumps, programmer and wiring centre.
- Double Pump Kit (fitted): two Grundfos 15-50 circulating pumps pre-wired with the cylinder thermostat to a wiring centre, with the programmer supplied separately.
Other Sizes and Larger Units available on request. |
||||||||||||||||||||||||||||||||||||||||
Uncomplicated Quality and Value
Copper Cylinder Manufacturers
© McDonald Engineers 2010