McDonald Engineers - Copper Cylinder Manufacturers. Hot water systems and calorifiers Hot Water Systems
Copper Cylinder Manufacturers
  
   
Uncomplicated Quality and Value ProductsServicesMarketsAbout UsManualsLocation  
POWERflow Unvented Mains Pressure copper hot water cylinder.
THERMflow Thermal Storage System. Thermal Stores in cylinder and combination models.
PLATEflow preplumbed Buffer Vessel and Brazed Plate Heat Exchanger
Open Vented Copper Cylinders
Commercial and Industrial Copper Calorifiers for Commercial, Industrial and Marine use. Both Vented and Unvented.
Cylinders designed for solar input
Timesaver Pre-plumbed coooper cylinder and cold water storage tank
Fastheat
Copper and Stainless Steel Backboilers
Helpline: 01592 611123
Our Vented Copper Cylinders carry a BSI Kitemark
SOLARSAVE Specifications
 
Back to SOLARSAVE

 Sizing Guide
 
Capacity No people Panel area Overall dimensions
150 Litre 1 - 2 2 – 2.5m. square 1125 x 530 x 750mm
165 Litre 2 - 3 2.5 – 3m. square 1225 x 530 x 750mm
180 Litre 2 - 4 3 – 4m. square 1325 x 530 x 750mm
210 Litre 3 - 5 4+ m. square 1525 x 530 x 750mm
 
These are only our standard sizes. Specials can also be manufactured - smaller, larger, different height, diameter etc. Please contact us with your requirements.

 
 
Resol Flowcon Unit   McDonald Engineers Cylinders
     
  • Differential Temperature Controller
  • Wilo ST20/6 Solar Thermal Pump (Grundfos available on request)
  • 3 Bar Safety Valve (6 Bar on request)
  • Pressure Gauge
  • Flowsetting Valve: 1-13 litres/minute
  • Flow and Return thermometers
  • Non-return valve
  • Max. working temperature 150ºC
  • Brass fittings
  • Insulation 0.041WmK.
  • Seals EPDM/Teflon
  
  • High efficiency Solar Coil
  • Manufactured in copper – tried and tested
  • Cylinders 100% recyclable
  • The best quality and service
  • Quick recovery Boiler Coil
  • Compression connections.
  • Solar Probe Pockets
  • CFC free, foam insulated with high quality white Plastisol cased finish
  • Vented and Unvented units available
  • Individually tailored units

 
   
© McDonald Engineers 2003 Home    Products    Services    Markets    About Us    Manuals    Location    Contact