|
 |
|
| |
Open Vented Cylinders
Although we stock a considerable range of finished
products, a large part of our production is manufacturing to our customer’s
own specifications. Some of the options are as follows:
Size to suit — We can manufacture cylinders in the following
diameters (before insulation): 200, 280, 300, 350, 375,400, 450, 500,
600, 675, 750 mm and upwards in Calorifiers sizes. You choose the
height and diameter that most suits the installation.
Connections sited to customer requirements, to make installation easy
in awkward spaces.
Extra connections for secondary returns, extra immersion heaters,
shower draw off, etc.
Aluminium anodes can be factory fitted to help prevent ‘pitting’
corrosion in areas where water has a tendency for this form of copper
corrosion, therefore extending the life of the cylinder. Contact our
helpline for advice regarding the suitability of Anodes in your area.
Extra factory applied insulation for less heat loss and greater energy
savings.
Horizontal cylinders for installations where there is insufficient
height for a vertical cylinder. Steel cradles available on request.
Available in Grades —
1 - 25 metres (82 feet) maximum working head
2 - 15 metres (49 feet) maximum working head
3 - 10 metres (33 feet) maximum working head
Indirect Copper Cylinders
Indirect Copper Cylinders (Double Feed) to BS 1566: 2002
Direct Copper Cylinders
Direct Copper Cylinders to BS 1566:2002
Combination Cylinders
Compact and Convenient
MACMATICS
No primary feed and expansion tank required.
Twin Cylinders
Built for cupboards
Maxistore-7
To suit ‘Off Peak’ Electric Tarriffs
Hyper Cylinders
High Performance Indirect cylinders
|
|
|
